Commercial door knobs are familiar in offices, shops, and other commercial buildings. While they provide security and convenience, they can also be a hassle to remove when it’s time to replace them.
One of the most frustrating challenges is when the door knob doesn’t have visible screws, making removal seem impossible. But fear not; there are ways to remove a commercial door knob without visible screws.
These screws are generally hidden in the inner casing of the door handle. When you are ready to remove the door knob, you will have to figure out how to separate the casing to access the screws.
You may find it daunting at first, as when you open it up, you have no idea what you are dealing with, but once you understand the basics, it becomes simpler. To do this, you will need a few hardware store items.
Some people aren’t aware that doors handle or knob attachments come in two main types. It is possible to see screws in some screws from the outside and to see screws in others from the inside.
Security is the most common reason for commercial door knobs having hidden screws. The following instructions describe removing a commercial doorknob that lacks visible screws.
Look For The Hidden Screw
In the first step, you should look for hidden screws. The screws on every doorknob are located somewhere, so you must find them!
It is usually the case that hidden screws are placed under the cover plate. If you are unsure of where to start, try looking under the door handle or knob.
To maintain the knob’s position, you’ll find a grub screw that holds the handle and bar. This screws through the door latch.
It is also worth checking the slot under the plate. Many of the key screws that are used to operate this door can be found on the faceplate that covers this slot.
An inside handle may have a small hole on its side. You can remove the handle by pressing something inside that hole.
The next step is to remove the trim ring to expose the screws. Trim rings or escutcheons are typically held in place by tension and can easily be removed.
Things You Will Need
You will need these tools to remove a commercial door knob without showing any screws:
- To remove the screws, use a Phillips head screwdriver
- Flathead screwdriver for removing the doorknob faceplate
- Replacement screws for the faceplate
- You may need lubricant to remove the doorknob
A Step-by-Step Guide to Remove a Door Knob With No Screws
Door knobs are just like many other things in your home that will eventually need to be replaced. If you need to remove a door knob, you don’t have to call a professional locksmith.
With the right tools, any homeowner can easily remove screwless door knobs if they know what they are doing.
Locate the Hidden Slot
Look underneath the door shaft for a small slot or hole. If you find a slot, you can turn the knob by inserting your flathead screwdriver into the hole.
If it is easy to remove, it should be done so easily. Conversely, if a small hole appears, you can straighten out a paper clip and push it inside the gap, then gently pull the knob out.
Pry Off the Rose
You place a rose around your door knob to decorate it. It’s possible that the rose won’t come off with the knob; you’ll have to remove it separately to uncover the mounting screws underneath.
Simply insert the tip of your screwdriver into the small opening between the plate and the door. Pull it gently off.
Remove the Hidden Screws
You must now remove the hidden mounting screws with your Phillips screwdriver.
Replace the Latch Plate
The screws holding your old latch plate in place need to be removed with your Phillips screwdriver. Once your new doorknob and matching hardware is installed, you are now ready to begin using it.
How To Remove The Casing And Door Knob
The faceplate and handle can be removed from the door by removing them. To remove the cap inside the doorframe, you need a flathead screwdriver.
Using a flathead screwdriver, pry off the case from the housing. The plastic cap must be removed by sliding off the hinge while ensuring it does not compress the hinge. To remove the knob, you should now be able to press a push button.
How To Find The Screws?
There are usually securing screws hidden behind a cover or plate attached to the main base plate.
A small rectangle may be found on the sides or bottom of the handle. You will need a tiny screwdriver to pry off the cap to expose the screws.
Once the screws are exposed, you may begin disassembling them. Reinstalling the cap by pushing it back on in the same position is possible.
In case you can’t remove the cap otherwise, use a sharp putty knife. You might find a small protrusion on the bottom end and start there.
For information on screws, contact the manufacturer if you can’t find them.
Tips For Removing Screws
To ensure each screw hole face is marked correctly, you can mark each screw hole face on the door. Screw removal is best accomplished with a Phillips head screwdriver.
It is recommended that you use utility gloves that have a good grip when removing screws. Ensure the gloves are grippy and secure, so they don’t come off during the process.
For each screw you want to remove, you need the correct-sized screwdriver. On each screw, leave about 1/4 inch (6mm) of headspace. In this manner, you can remove the screw from its hole.
Final Words
You can do it yourself if you learn how to remove a commercial door knob without visible screws.
Once you’ve removed the face plate, you’ll have access to the screws, which can then be undone to remove the door knob.
Don’t get started with the project until you have all the tools and the right knowledge. Otherwise, you might damage the door and door knob.
When you need to replace a door knob quickly, use the steps mentioned above to guide you.
In case you are unclear about removing doors or hardware, it would always be better to seek professional assistance.
