Sadly, no. There would be approximately 9″ of overlap between the sides of a king mattress and a queen box spring because a king mattress is approximately 78″ wide and a queen box spring is approximately 60″.
What if you need to put one? You’re welcome to go ahead. The only time you should do this is if you don’t care if the mattress is ruined or you are injured.
Is it feasible to place a king-size mattress on a queen frame? The straightforward answer is no.
Due to the size disparity, king-size mattresses are larger than queen frames, leading to an insecure and uneven fit. This mismatch can result in discomfort and instability, making it impractical to use a king mattress on a queen frame.
A king mattress measures 78 x 80 inches, and a queen mattress measures 60 x 80 inches. Therefore, the king mattress would hang over the sides and quickly break down.
As you get in and out, you might slide off the side and get hurt. Get a cheap king box and let the problems go. A king mattress can definitely be fitted on a queen frame if you have an adjustable bed frame.
You just need to compare the measurements of your new king mattress with the measurements of your queen bed frame and adjust the bed frame according to the new mattress’ size.
Putting A King Mattress On A Queen Frame
You should install a king mattress on a queen or full bed frame if you have an adjustable bed frame that can be adjusted from queen to king.
Due to its width, a king-sized mattress cannot be placed directly on a queen bed frame, and if you don’t currently have an adjustable bed frame, you will have to purchase one.
As part of a home renovation, this may seem like an easy way to get a new bed for your guest or main bedroom.
However, you can make a more informed decision if you know many things about queen and king size mattresses and queen or full bed/frames. King-size mattresses are 76″ x 80″, whereas queen-size beds are 60″ x 80″.
Since a queen frame is sixteen inches narrower than a king mattress, a king mattress cannot fit directly on a queen frame. It is possible to fit a queen-sized mattress in a king-sized frame, however.
Despite the fact that the queen mattress measures 60 inches wide, it measures 80 inches long. Your bed will protrude a bit due to its size, but the structure will support it.
The reverse, however, requires some thought. As king-sized mattresses cannot be squeezed into queen-sized bed frames.
Secondly, what is the difference in significance between a king and a queen? There is nearly 16 inches of length difference between a queen-size mattress and a king-size mattress.
Adjustable Bed Frames
There’s no point in buying a new bed frame just because you’ve outgrown your current one. A new furniture set with adjustable beds doesn’t have to be purchased entirely.
In only a few minutes, you can switch from a complete bed to a queen bed and back again.
It is not possible to fit a king-size mattress into a queen-size bed frame unless you have an adjustable bed frame that can be shifted from a queen-size to a king-size.
As a result, you will need to purchase a new bed frame, dismantle the old one, and dispose of its parts.
For a king-size bedspread, you’ll need a new set of queen-size sheets.
How To Put A King Mattress On A Queen Frame? (DIY)
If you don’t have an adjustable bed frame, you can put a king mattress on a queen frame using the steps below.
The footboard and headboard of a wooden bed frame can be enlarged by cutting new ones.
If you wish to convert your queen bed to a king bed, remove the footboard and headboard, then separate the horizontal supports or slats from the bed frame.
Taking precise measurements of the distance between the footboard and the headboard is the next step.
On many hardwood bed frames, this point is fastened in place or slotted into a notch. It’s advisable to measure the notch’s depth, width, and height before sliding it.
You should make sure that the height of your new footboard and headboard matches the height of your old ones.
It is possible that the groove you are sliding to the headboard does not fit the board you have chosen. The board will need to be cut to fit into the groove if this is the case.
With a pencil, mark out the track’s diameter and depth. By using a jigsaw or table saw, the board can be cut to the desired size.
In order for your headboard and footboard to slide into the right position, smooth their edges. Drilling them in place may be necessary if you find it necessary.
You should still verify that the knowledge of one of your sideboards is equal to the knowledge of the other. Your sideboard’s depth will determine how far your sideboard should be from the wall.
Lastly, ensure that you have cut the slats to this length and fastened them with the bolts or screws that came with the preceding slats.
Adding a king-size bed to your queen-size bed will upgrade your bed while saving you money. In this situation, you only need to modify the width of your footboard and headboard to upgrade.
Does Adding A Headboard Work?
Trying to fit a large-sized mattress like the PrimaSleep Multi-Layered 9-Inch Memory Foam on a queen-sized frame is tricky.
It might come as a surprise to you that you could purchase parts for a steel bed frame and use them to make a king-size headboard that matches your king-size bed frame, mattress, and box spring. If you want to try this, it won’t work.
In order to make your headboard look conventional and acceptable, you need to pay close attention to these factors.
In addition, a steel bed frame measuring 76 inches in width is required for a king-size mattress. King-size headboards fit perfectly on this frame size.
Depending on the headboard width, the steel bed frame and mattress may be about an inch wider than the king headboard. For aesthetic reasons, the headboard is designed this way.
In comparison to a queen-size bed frame and mattress, a king-size headboard is sixteen inches larger. The headboard will be visible on both sides when used with a mattress, which is unattractive.
Choosing Mattresses
There are many options available when it comes to buying a new mattress. When you are not aware of all the options available, choosing one that meets your needs can be challenging.
When you finally decide to upgrade from a queen-sized bed to a king-sized bed, there are a few things to keep in mind.
King-size beds have an extra sixteen inches over queen-size beds, which makes them ideal for families with children.
An increase in space will be appreciated by anyone who values freedom of movement and comfort.
You should be aware that the process of switching from a queen to a king-size bed involves many more considerations than just getting a new set of mattresses.
The metal bed frame will be necessary when upgrading a queen mattress to a king. It’s easy to change from a queen to a king with an adjustable bed frame.
Changing over your bed frame yourself can be a cost-effective alternative if you do not already have one.
The typical size of a king-size bed is 78 inches by 80 inches. You can then use a circular saw, or a table saw to cut your footboard and headboard to the proper height and length.
Buying New Beds
Bed frames come in two types: those that support a full-sized bed and those that support twin, full, or queen-sized beds. In order to support the weight and size of king beds, metal frames are usually used.
Beds play an important role in your comfort while sleeping and ultimately in your wellbeing.
The Bottom Line
It’s also important to note that kings and queens differ significantly in size. A noticeable change is the sixteen-inch width left on both sides.
I hope that you have found this article helpful and that you are able to answer your questions regarding king-size mattresses fitting into queen-size beds.
